落石冲击混凝土板与缓冲层组合结构的动力响应          下载免费PDF全文

吴建利  胡卸文  梅雪峰  许泽鹏  罗刚  韩玫 《水文地质工程地质》2021,48(1):78-87

钢筋混凝土（RC）板与一定厚度的土颗粒缓冲层组合结构被广泛用于山区高位单体及群发性崩塌落石的防治,为研究此类防护结构在落石作用下的冲击力衰减规律及RC板的破坏模式,开展了室外系列落石冲击试验。结果表明,增大缓冲层厚度能够有效减小最大冲击力,峰值加速度随缓冲层厚度减小而增大,尤其在缓冲层厚度为0.1 m及0.2 m时,最大值急剧增大,峰值加速度与缓冲层厚度的变化满足指数函数关系;根据量纲分析原理得到缓冲层最大冲击深度与动能的平方成正比、与最大入射冲击力成反比的计算公式,且与实测值较吻合;入射冲击力在缓冲层内的衰减率随缓冲层厚度的增加以指数函数递增,在0.6 m缓冲层厚度下可使峰值冲击力衰减70%左右;随累积冲击能级的增大,RC板经历了弯曲起裂及扩展、次级弯曲裂纹和剪裂纹产生及跨中弯曲裂纹贯通的过程,试验结束时RC板整体表现出典型的弯曲破坏特征。  相似文献   

Centrifuge modelling of landslides and landslide hazard mitigation: A review     

《地学前缘(英文版)》2023,14(1):101493

Landslides are serious geohazards that occur under a variety of climatic conditions and can cause many casualties and significant economic losses. Centrifuge modelling, as a representative type of physical modelling, provides a realistic simulation of the stress level in a small-scale model and has been applied over the last 50 years to develop a better understanding of landslides. With recent developments in this technology, the application of centrifuge modelling in landslide science has significantly increased. Here, we present an overview of physical models that can capture landslide processes during centrifuge modelling. This review focuses on (i) the experimental principles and considerations, (ii) landslide models subjected to various triggering factors, including centrifugal acceleration, rainfall, earthquakes, water level changes, thawing permafrost, excavation, external loading and miscellaneous conditions, and (iii) different methods for mitigating landslides modelled in centrifuge, such as the application of nails, piles, geotextiles, vegetation, etc. The behaviors of all the centrifuge models are discussed, with emphasis on the deformation and failure mechanisms and experimental techniques. Based on this review, we provide a best-practice methodology for preparing a centrifuge landslide test and propose further efforts in terms of the seven aspects of model materials, testing design and equipment, measurement methods, scaling laws, full-scale test applications, landslide early warning, and 3D modelling to better understand the complex behaviour of landslides.  相似文献   

Rainstorm-generated sediment yield model based on soil moisture proxies (SMP)     

Sushindra Kumar Gupta  Pushpendra K. Singh  Jaivir Tyagi  Gunwant Sharma  Ajay Singh Jethoo 《水文研究》2020,34(16):3448-3463

This study develops improved Soil Moisture Proxies (SMP) based suspended sediment yield (SMPSY) models corresponding to three antecedent moisture conditions (AMCs) (i.e., AMC-I-AMC-III) by coupling the improved initial abstraction (I_a-λ) model, the SMA procedure and the SMP concept for modelling the rainfall generated suspended sediment yield. The SMPSY models specifically incorporate a watershed storage index (S) model to accentuate the transformation from storm to storm and to avoid the sudden jumps in sediment yield computation. The workability of the SMPSY models is tested using a large dataset of rainfall and sediment yield (98 storm events) from twelve small watersheds and a comparison has been made with the existing MSY model. The goodness-of-fit (GOF) statistics is evaluated in terms of the Nash Sutcliffe efficiency (NSE), and error indices, i.e., root mean square error (RMSE), normalized root mean square error (nRMSE), standard error (SE), mean absolute error (MAE), and RMSE-observations standard deviation ratio (RSR). The NSE values vary from 74.31% to 96.57% and from 75.21% to 91.78%, respectively for the SPMSY and MSY model. The NSE statistics indicate that the SMPSY model has lower uncertainty in simulating sediment yield as compared to the MSY model. The error indices are lower for the SMPSY model than the MSY model for most of the watersheds. These results show that the SMPSY model has less uncertainty and performs better than the MSY model. A sensitivity analysis of the SMPSY model shows that the parameter β is most sensitive followed by parameter S, α and A. Overall, the results show that the characterization of soil moisture variability in terms of SMPs and incorporation of improved delivery ratio and runoff coefficient relationship improves the simulation of the erosion and sediment yield generation process.  相似文献   

中文村名俗称与规范名称的匹配算法     

刘洋  赵婷婷  朱峰 《北京测绘》2020,(3):371-375

随着数字化的发展,越来越多的应用要求通过采用自然语言文字描述直接找到对应的详细的地址信息,并能够在空间位置上进行显示,即地名地址匹配空间化过程。然而,现今在地名的规范化角度还存在着很多问题,在乡镇或街道办及以上的行政等级的命名中都已基本规范统一,但是在村庄级的命名中还有待进一步的完善。所以本文通过对国内外文献研究,规范村名命名规律,匹配算法研究进一步加深中文村名俗称与规范名称的匹配算法的研究。  相似文献   

基于PS-InSAR技术的黄土大厚度挖方区回弹变形规律分析     

梁小龙  王建业  白泽朝  齐二恒  李攀 《测绘通报》2020,(3):163-166

以陕北某湿陷性黄土大厚度挖方地基工程为研究对象，采用PS-InSAR技术对2018-10—2019-11间获取的16景TerraSAR-X卫星影像进行处理，获取了湿陷性黄土挖方区回弹变形信息，总结了大厚度挖方区时序回弹变形特征。结果表明，由于上部土体应力卸载，在开挖区域存在地基土回弹变形现象，选取的高密度PS点变形信息较好地反映了研究区的真实变形情况，回弹变形范围与开挖边界吻合，另外挖方厚度越大，土体开挖引起的回弹变形越大；在开挖完成后的1年监测时间内，回弹区变形量随时间呈线性变化，在最大开挖厚度处，产生最大回弹量为29.3 mm；此外，PS-InSAR技术监测到的变形量与实地水准结果吻合性较好，表明该技术在黄土大厚度挖方区回弹变形监测中具有较好的应用效果。  相似文献   

分形岩石裂隙中渗流扩散运动的试验研究     

崔溦  邹旭  李正  江志安  谢武 《岩土力学》2020,41(11):3553-3562

由于存在大量粗糙不规则裂隙，使得岩体中流体运动极为复杂。针对天然粗糙岩石裂隙渗流试验存在物理模型隐蔽性和不可重复性等难点，基于三维Weierstrass-Mandelbrot分形函数构建了粗糙节理面的裂隙通道，采用3D打印技术获得了透明精细的裂隙模型，使用微流体控制仪研究了不同试验条件下的裂隙渗流扩散运动，分析了裂隙通道流量与压力水头、裂隙宽度和分形维数之间的关系。研究结果表明：与平行板立方定律近似，在分形裂隙中，裂隙通道流量与压力水头成线性关系；单宽流量与裂隙通道的宽度成近似的三次方关系；考虑分形维数影响时，相同条件下流过裂隙通道的流量随着分形维数的增加而增加；粗糙裂隙渗流立方定律可采用与分形维数相关的幂指数函数进行修正。  相似文献   

桂西北林旺金矿床构造控矿规律及成矿模式探讨     

张知春 《地质与勘探》2020,56(2):277-287

桂西北林旺金矿是近年来右江盆地新发现的卡林型金矿,位于乐业碳酸盐台地边缘乐业-浪全同生断裂带上。通过对矿区进行野外调查、岩矿鉴定并结合勘探成果进行综合研究,发现I号矿体群与断裂、褶皱的时空联系具有构造分带的特征,以F1断层为界,上盘褶皱鞍部发育石英杂砂岩夹粉砂质泥岩矿体,矿体近F1断层破碎带部位发育破碎的硅化构造岩带,F1下盘近破碎带部位发育强烈劈理化、炭化粉砂质泥岩带,指示矿区在印支期挤压过程中,石英杂砂岩顺着先存构造薄弱面以泥岩层为滑动系统,往上部逆冲并逐渐发生褶皱,产生许多张裂隙,成为成矿流体富集的场所。林旺金矿床是层滑-褶皱构造体系与成矿流体耦合作用的产物,分析了矿床构造成矿规律,提出了以层滑-褶皱运动机制为基础的成矿模式以及成矿远景。  相似文献   

An approach to model the mechanical behavior of transversely isotropic materials          下载免费PDF全文

M. Mahjoub  A. Rouabhi  M. Tijani  S. Granet 《国际地质力学数值与分析法杂志》2016,40(6):942-961

The present work proposes an approach to adapt existing isotropic models to transversely isotropic materials. The main idea is to introduce equivalence relations between the real material and a fictitious isotropic one on which one can take all the advantages of the well‐established isotropic theory. Two applications of this approach are presented here: a failure criterion and a damage model that takes into account the load‐induced anisotropy. In both cases, theoretical predictions are in agreement with the experimental data. In the present paper, the developed approach is applied to sedimentary rock materials; nevertheless, it can be generalized to any material that exhibits transverse isotropy. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

On the dependence of the saturated hydraulic conductivity upon the effective porosity through a power law model at different scales          下载免费PDF全文

Carmine Fallico  Samuele De Bartolo  Massimo Veltri  Gerardo Severino 《水文研究》2016,30(13):2366-2372

We study the scale dependence of the saturated hydraulic conductivity K_s through the effective porosity n_e by means of a newly developed power‐law model (PLM) which allows to use simultaneously measurements at different scales. The model is expressed as product between a single PLM (capturing the impact of the dominating scale) and a characteristic function κ^? accounting for the correction because of the other scale(s). The simple (closed form) expression of the κ^?‐function enables one to easily identify the scales which are relevant for K_s. The proposed model is then applied to a set of real data taken at the experimental site of Montalto Uffugo (Italy), and we show that in this case two (i.e. laboratory and field) scales appear to be the main ones. The implications toward an important application (solute transport) in Hydrology are finally discussed. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

降扎铀矿床的成矿规律     

冯国丕 《四川地质学报》2011,(3):315-317

通过对降扎铀矿床地质条件的分析,总结了矿床围岩蚀变、控矿构造形式、矿石矿物特征、铀矿体主要特征、矿物组合、成矿流体、盲矿体地表放射性物化探异常等矿床特征和成矿规律,指出向阳沟矿段等已知矿段深部、向阳沟以西地段、热乎东地段为以后的找矿靶区.  相似文献